
Tweet
Guests who bought this also bought
-
IS 360W
USD$ 139.00
Ceiling Mount
Outdoor Occupancy Sensor -
IS 360B
USD$ 139.00
Ceiling Mount
Outdoor Occupancy Sensor -
HS 300W
USD$ 108.00
Halogen Outdoor Sensor Light -
HBS 300
USD$ 58.00 -
FL 300W
USD$ 98.00
Outdoor Sensor with Dual Lampholders -
IS 3180-24
USD$ 96.00
Wall Mount Occupancy Sensor -
HBS 200
USD$ 58.00 -
IS 345-24
USD$ 96.00
Corridor Occupancy Sensor
IR WLS 1-W
Description↑
OVERVIEW
The IR WLS 1 is a line voltage, single relay, Passive Infrared
(PIR) wall switch occupancy sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold OFF photocell daylight option will keep the lighting load off if the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.
Features
- PIR (passive infrared) wall switch occupancy sensor
- Line voltage lighting control (120/230/277 VAC, 50/60 Hz)
- 180° coverage pattern
- Manual ON or Automatic ON option
- Light level feature keeps lights OFF when sufficient daylight is present
- Mounts to a single-gang NEMA-style, standard switch box & decorator-style wall plate by others
- “Switch Link” communication allows for up to 4 sensors to be grouped together
- IQ Mode dynamically adjusts the ‘ON’ time delay by learning individual room occupancy
- Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds
- Audible alert feature provides an audible warning that the load will shut-OFF in 10 seconds unless additional motion is detected
- Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected
- Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF button
Specifications↓
Part Number | 66100 |
Voltage | 120/230/277 VAC, 50/60 Hz |
Mounting | single-gange NEMA-style switch box (standard switch box) & decorator-style wall plate by others |
Load Rating | 0-800 watts @ 120/230/277 VAC, 50/60 Hz tungsten, magnetic or electronic ballast 1/6 hp 0-600 watts @ 120/230/277 VAC, 50/60 Hz CFL or LED electronic ballasts |
Sensing Technology | passive infrared (PIR) |
Time Setting | IQ/Test, 5, 15, 30 minutes |
Light Level Settings | 80 - 2000 Lux / 8 - 200 fc |
Enfironment | IP20 rated, 0°C to +40°C, 32°F to +104°F |